Aug 19, 2019 · ALL sketches in Fusion 360 are also 3D in nature. Below is an active sketch with line and spline elements. With the same sketch active, simply selecting the Move/Copy tool, you can drag sketch elements into 3D space. Please note, that at the moment, this does have an impact on dimensions. This can be very, very powerful.
May 15, 2023 · Solution: Fusion 360 does not have a sketch tool to automatically create a 3D spiral or helix. This is the most common workflow to create a 3D sketch helix or spiral: Ensure that 3D Sketch is turned on by going to Preferences > Design and checking the box next to "Allow 3D sketching of lines and splines."
Nov 10, 2019 · patmat2350 2166 Views, 6 Replies 11-10-2019 08:24 AM Generating & Using 3D splines I've been having trouble with lofted shapes while working on boat hull designs. I think I see the root of my problems, but want to see if I understand correctly. Problem: Lofting error when picking rails: Rail does not intersect all sections.
Transcript: By the end of this video, you’ll know how to use both spline commands that are available in Fusion 360. The spline commands can be activated from the sketch dropdown list or from the right-click sketch menu. There are currently two types of spline commands available.
But if you want to create 3D splines directly, enable the appropriate option in Fusion 360 preferences (in the menu under your login name). In General > Design check (enable) the option "Allow 3D sketching of lines and splines": You can use osnaps and constraints to existing 3D model geometry while drawing 3D splines. You can then use the ...